Published in: 2011
Pages: 93
Publisher:
PRACTICA Foundation
Author:
Nederstigt, J., Van der Wal, A.
Uploaded by:
SuSanA Admin
Partner profile:
common upload
858 Views
14 Downloads
Module 1 creates awareness on the technology and applicability of the rope pump as a family water
pump and provides a road-map for implementation. It is meant for NGO’s, governments and implementing organisations considering the implementation of a rope pump production and installation project.
Module 2 describes the installation and maintenance procedures of the rope pump. This module is a step-bystep explanation that makes use of cartoons to illustrate the process. It is designed to be used by technical staff responsible for installation of the pump and training of the users in operation and maintenance of the pump.
Module 3 describes the detailed steps of production of the rope pump including illustrations of production. The production steps refer to the production drawings, making use of the appropriate welding jigs, of which the drawings are included. This module is designed to be used by rope pump production enterprises as well as a guide for production training courses.
This handbook can be used as a guide during training sessions for rope pump producers, installers, local trainers and quality controllers. It also serves as a reference for, NGOs, development agencies, and enterprises for the process of rope pump introduction. The handbook consists of three sections that can be read together, or used and printed separately for the various target groups.
Nederstigt, J., Van der Wal, A. (2011). Rope Pump - Technical Training Handbook on Rope Pump Production, Installation and Maintenance. PRACTICA Foundation
English Guidelines and manuals Technical drawings Water (irrigation, process, other)
Share this page on